Will The Quartz Be Mixed in Color?

Jun 25, 2021

As a new green and environmentally friendly stone, quartz stone itself has the characteristics of scratch resistance, abrasion resistance, high temperature resistance, anti-permeability, anti-corrosion, anti-radiation, etc., and has gradually become the first choice for home decoration stone.

Today, let’s talk about the bleed-out problem of quartz stone that everyone is concerned about.

The water absorption rate of the quartz stone plate itself is only 0.02%, which is almost zero. The bleeding problem of die-casting plates is very rare, but the tea water is an exception, the tea water may bleed is only possible. Because tea contains 20% of tea polyphenols, which are very soluble in water and fat, it just so happens that the raw material of quartz stone plate contains 7% of resin. Therefore, when the countertop is in contact with the tea water, it should be clear in time to avoid the possibility of bleeding. Even if it does not bleed, the tea stains will remain on the countertop, which will cause unnecessary trouble for the later stage of clarity.

It is specially reminded that the casting plate is different from the die-casting plate. The casting plate is not subjected to high pressure and high vibration, which causes its density and hardness to be relatively low. Compared with die-cast plate, it will be inferior in all aspects. The chance of bleeding is much greater than that of die-cast plates. Will not be greedy for cheap and choose to cast plates. There is one more thing to pay attention to. If there are stains on the joints of the quartz stone countertops, please clean them in time. It is recommended to focus on waxing here (car wax or floor wax can be used).



You Might Also Like